Blog

Is The Condition of My Brake Fluid Important to Brake Performance?

Your car brake fluid system would not be complete without brake fluid. The primary element of your car’s braking system is hydraulic fluid. The fluid facilitates pressure which is applied to the wheel hub-mounted rotors. There is a higher chance that your brake fluid may degrade or get polluted, impairing its operational process. You need to understand brake fluid components and the functional process towards realizing its significance.

Brake fluid concept

According to professionals, brake fluid increases the efficiency of a car’s movement by transforming the hydraulic brake system into pressure. Whenever you are using your car, the brake fluid must be enough. Majority of accidents that occur while driving are pegged to inadequate brake fluid. The lack of brake fluid might prevent the brakes from working. When your car has a bad brake system, you might experience catastrophic effects. You require brake fluid flush to reduce road accidents. The process involves replacing the contaminated fluid with a fresh one through bleeding out for preventative maintenance.

Hygroscopic on brake fluid

Your care fluid reservoirs and brake lines might be endangered by moisture. Hydrophobic brake fluids have a higher absorption rate of moisture from the atmosphere. Car fluids absorb moisture in the environment, which risks the brake system. The hygroscopic presence on a car brake absorbs about 2% moisture in the environment, and you should replace the brake system yearly. Moisture on the brake system lowers the boiling point, increasing your brake failure.

What makes Brake Fluids Hygroscopic?

Over 200°C of heat is transferred to your car brake fluid. Your car fluid is less compressible than air, which results in sponginess on the brake pedal. When your car brake fluid is too hot, there are higher chances of a reduced brake performance, which attracts road accidents. The brake pedal may be problematic at intersections whenever your car brake fluid is repeatedly heated over its boiling point. This problem is caused by brake fade.

Contact Ward Tirecraft today for exceptional brake repairs!